How To Install An Awning An A House

How to Install an Awning

Resources

Nathan installed an Icon awning base kit with a matte black frame and a clear finish, which is manufactured by Feeney, Inc. Nathan creates the proper-sized PVC mounting blocks by following the template of the vinyl mounting block to measure and trace where the French cleat will be cut. Then Nathan uses a miter saw to square the edges of the board and cut the boards to length for the mounting bracket. After, Nathan uses a portable bandsaw to cut out the cleat for each piece of PVC. Nathan uses an electric drill to securely mount the blocks to the exterior siding using exterior grade screws. To mount the awning, Nathan first applies a silicone sealant along the backside of the bracket to keep it watertight. Nathan then uses an electric drill to make pilot holes on the mounting blocks. Nathan then uses exterior-grade heavy-duty structural screws to secure the awning to the siding. Finally, Nathan applies silicone sealant around the edges of the awning to ensure no water can penetrate the siding. Expert assistance is provided by Feeney, Inc. All other products can be found at home centers.